產(chǎn)品詳情
英國進口MWA鑄鐵焊條Mac Cast E410|鑄鐵件修復|顏色匹配
Non-machinable electrode for cast iron repairs. Can be used on dirty and contaminated castings or any cast iron repair where machinability is unimportant. For best results castings should be preheated (maintained during welding) and slow cooled, to prevent possibility of cracking. Excellent colour match, will rust.
鑄鐵修理用焊縫不可加工焊條。在可加工性不重要的前提下可用于臟和被污染的鑄件或任何鑄鐵的修復。為獲得理想效果，鑄件應預熱（焊接期間保持）并緩慢冷卻，以防止開裂。極好的顏色搭配，會生銹。
Typical All Weld Metal Chemical Analysis (%)
典型全焊縫金屬成分(%)
|
C |
Ni |
Si |
|
3-3.5 |
1-1.5 |
0.6 |
Sizes Available and Recommended Amperages
尺寸Φ/電流：
|
2.5mm |
3.2mm |
4.0mm |
5.0mm |
|
60-80A |
90-110A |
110-140A |
140-180A |
Current電流：AC/DC (+)
Related Specification參考標準：Cast Iron Special
Storage儲存：Electrodes should be stored in dry conditions. Should the electrodes become damp, re-dry for one hour at 150°C before use. 焊條應儲存在干燥環(huán)境中。如果焊條受潮，應在150°C下重新干燥1小時后再使用。
